Aller au contenu

Boitier en aluminium pour Raspberry Pi 4

USD$49.99

Le boîtier en aluminium Mechatronics Art agit comme radiateur sur le Raspberry Pi 4 et augmente ses conditions et performances, et possède également un bouton configurable qui peut être programmé pour remplir différentes fonctions (ex. bouton de redémarrage).

Vue 360 interactive (déplacez pour bouger, double-cliquez pour une vue plein écran):

Effacer

Le boîtier à refroidissement passif Mechatronics Art est un boîtier en aluminium de haute qualité spécialement conçu pour le Raspberry Pi 4, alliant confort et performance. Le boîtier agit comme un radiateur passif sur le CPU et la puce USB du Raspberry Pi 4, le refroidissant de façon optimale et permettant d’augmenter les performances du Rpi.

Le boiter possède un bouton configurable via les GPIOs (e.g. bouton de reset), et a un accès facile à la carte SD. Comparé au boîtier pour Raspberry Pi 3, ce boîtier vient également avec un capuchon protecteur en aluminium qui permet de protéger la carte Micro SD de l’utilisateur au besoin. Le boîtier possède des trous afin de fixer la caméra du Rpi directement sur le boîtier (vis incluses). Le boîtier à refroidissement passif en aluminium Mechatronics Art donne un accès complet aux ports GPIOs : un capuchon au-dessus des GPIOs permet d’ouvrir ou fermer l’accès aux ports GPIOs. Le boîtier comporte également des accès aux ports DSI et CSI.

Ce produit existe en plusieurs couleurs : bleu océan, Rouge fort, gris arme-à-feu, noir intense et orange juteux.

Le kit vient avec tout le matériel nécessaire pour l’installation : pâte thermique, pieds en caoutchouc, vis d’installation, clé hexagonale, vis pour fixation de caméra, guide d’assemblage.

Caractéristiques

  • Matériel: aluminium anodisé machiné;
  • Bouton configurable;
  • Capuchon de protection pour la carte Micro SD afin de protéger la carte de l’utilisateur;
  • Accès facile à la carte SD;
  • Accès aux GPIOs;
  • Trous de fixation pour caméra (vis incluses);
  • Accès aux ports DSI et CSI;
  • Couleurs: bleu océan, rouge fort, gris arme-à-feu, noir de minuit, rose framboise, orange juteux .

Liste des pièces

  • 1x set boîtier en aluminium;
  • 4x pieds en caoutchouc;
  • 1x connecteur pour bouton reset;
  • 4x vis de fixation;
  • 2x vis de fixation pour camera (caméra non inclus);
  • 1x clé hexagonale;
  • 1x guide d’assemblage.

Compatibilité

  • Raspberry Pi 4 et 4B (1GB, 2GB, 4GB, 8GB).
Poids240 g
Dimensions19 × 22.5 × 5 cm
Color

Gris arme à feu, Bleu ocean, Rouge fort, Noir de minuit, Orange Juteux

Enclosure Dimension

95mm x 63mm x 28mm (3.75in x 2.5in x 1in)

Case Weight

120g

Manuel

Download Assembly Guide
Télécharger le guide d'assemblage

FAQ

The tight fitting is actually a design decision we took , all overall dimensions are extremely tight fit with the Raspberry Pi 3, and inserting it require to place very well the HDMI connector and the Micro Jack connector, and also pushing firmly on the USB connector

Once the HDMI and Micro Jack connector are aligned into their respective hole in the case, you can start sliding the Pi into the case, just like you did on the picture. The extremity of the USB Port will touch the case, and you will have to firmly push on the USB Connector to make it pass. Once the USB Connector have passed, all the rest will automatically align properly. Do not hesitate to push sufficiently on the USB Port.

If you purchase the case with the Raspberry Pi installed, we connect the button to GPIO24 (pin 18) and GND (as seen in this tutorial). You can use this GPIO24 (pin 18) as the button and program the button to do what you want!

Yes, it is compatible with the Raspberry Pi 2. The Activity and Power LEDs of the Raspberry Pi 2 being placed at a different place, the activity and Power LEDs of the Raspberry Pi 2 are visible through the Wifi symbol cuts of the Case.

We measured Temperatures around 57C measured under full load (SETI@home launched under BOINC) with the Mechatronics Art aluminum enclosure using a Raspberry Pi 3 Model B with an ambient temperature of 33C. Comparison with the same test conditions using two small aluminum heatsinks attached directly onto chips, measured temperature was 83C. Without any cooling system, measured temperature rose above 93C.

The case is electrically isolated from the Raspberry Pi circuit. The case is not grounded and does not prevent any wireless communication with the sock antenna of the Raspberry Pi. We compared the signal strength of one Raspberry Pi 3 with the Mechatronics Art aluminum case, and another Raspberry Pi naked. We measured a loss of power of -4dBm at 30m distance for the Raspberry Pi with aluminum enclosure, which is typically negligible.

Yes! You can connect the connector of the reset button directly to some of the GPIOs of the Raspberry Pi, and follow this tutorial to transform the reset button into a shutdown button. By default, we advice to solder the pin header (included) to the reset pins of the Raspberry Pi, which acts as a hard reset by default with any distribution.